Skip to content

Putty & Phase Change

Between a fixed-thickness pad and a runny paste sit two materials most builders never try. Putty is kneaded to whatever height the gap happens to be. Phase-change sits solid at room temperature and turns into a paste-thin film the first time the processor gets hot.

  • 5 products
  • $4.99 – $40.99
  • 5 of 5 rated

Not sure this is the right material?

Four interface materials, one job each. All four are in this catalog.
 Thermal padThermal pastePuttyPhase change
Gap it can fillFixed 0.5 – 3.0 mmMicroscopic onlyAnything you knead it to0.2 mm, self-levelling
Conductivity here12 – 15 W/mK3.8 – 8.5 W/mK6 – 10 W/mKPaste-class once melted
Goes onPeel and lay flatPea, line or spreadRoll, press, trimDrop in dry, heat once
Comes offIn one pieceWipe with alcoholPeels and rolls upScrape after cooling
ReusableUsually yesNoYes, re-knead itNo
Made forVRM blocks, VRAM, M.2 drivesCPU and GPU dies under a cold plateOdd heights, laptop shims, mixed stacksLaptops and set-and-forget builds

Read the interface guide