GP-Extreme 12W Thermal Pad, 80 x 40 x 0.5 mm
12 W/mK · 80 × 40 × 0.5 mm
4.7 3,062 ratingscounted across all 5 thicknesses of this sheet size

Accessories
4.3 193 ratings
The SL-PCI-02 slot holder: two slim 120 mm UV blue fans mounted in the expansion slots, with a dust filter and Y-cable.
$42.97
Low stock at our retail partner
Sold and shipped by an authorized retail partner. Price shown was current when this page was built.
Check price and buyThe space under a graphics card is where warm air collects, and almost no case has a fan mount pointing at it. This bracket takes two expansion slots and holds a pair of slim 120 mm UV blue fans in them, with intake holes and a dust filter on the outside and a Y-cable so both run from one header.
A card hangs in the middle of the chassis with its exhaust pointing at a board, and in many builds there is no intake below it at all. Fans in the slots underneath draw cool air from outside the case directly into that dead zone, which is the shortest possible path to the part that needs it.
The bracket occupies two expansion slots and the fans are slim rather than full depth, so the assembly stays clear of a card in the slot above it. Both fans run from the bundled Y-connector on a single header, which matters on boards that have already given their headers to the case.
Because the air is pulled in from behind the machine rather than recirculated, the bracket carries its own perforated intake and a dust filter over it. That filter is the part people forget: check it when you clean the front panel, since a blocked one quietly turns the whole assembly into decoration.
The fans are UV reactive rather than lit from within, so they glow only under an ultraviolet source and otherwise read as plain blue. In a build with a UV cathode that is a deliberate period look; in a case with no UV light at all it is simply a colored fan.
12 W/mK · 80 × 40 × 0.5 mm
4.7 3,062 ratingscounted across all 5 thicknesses of this sheet size
15 W/mK · 90 × 50 × 0.5 mm
4.7 1,021 ratingscounted across all 5 thicknesses of this sheet size
15 W/mK · 90 × 50 × 3 mm · 2 sheets
4.8 741 ratings
15 W/mK · 90 × 50 × 1 mm · 2 sheets
4.8 734 ratingscounted across all 3 thicknesses of this sheet size