GP-Extreme 12W Thermal Pad, 80 x 40 x 0.5 mm
12 W/mK · 80 × 40 × 0.5 mm
4.7 3,062 ratingscounted across all 5 thicknesses of this sheet size
Thermal Pads
GP-Extreme 12W Thermal Pad, 120 x 120 x 1.5 mm
4.4 124 ratingscounted across all 5 thicknesses of this sheet size
GP-Extreme 1.5 mm in the large 120 x 120 mm format at 12 W/mK, for repeat graphics-card work at the most common gap size.
$32.70
Low stock at our retail partner
Sold and shipped by an authorized retail partner. Price shown was current when this page was built.
Check price and buy- Model
- TP-GP01-S-C
- Conductivity
- 12 W/mK
- Sheet size
- 120 × 120 mm
- Thickness
- 1.5 mm
- In the pack
- 1 sheet
- Series
- GP-Extreme
- Category
- Thermal Pads
The gap that appears most often on graphics cards, in the sheet size that suits doing several cards in a row. This 120 x 120 mm square of 1.5 mm GP-Extreme carries the same 12 W/mK rating as every other piece in the line, and gives a workshop the freedom to cut long memory strips and backplate runs without measuring the remaining stock first.
Long runs without joining pieces
A 120 mm edge is long enough to cover a memory row, a backplate span or a full VRM bank in a single continuous piece. That matters more than it sounds: every joint between two pads is a line of air across the component underneath, and joints are what happen when the sheet is too small for the run.
A working stock for card repair
Graphics-card teardowns cluster. A shop that does one usually does several that month, and they are usually the same generation of card with the same gaps. A large sheet at the size those cards want turns a series of orders into a single one.
Checking a batch before you cut it all
When cutting a set for multiple identical units, fit the first one completely and close the cooler before cutting the rest. If the impression on the pad shows even compression across its face, the template is right and the rest can be produced quickly. If it does not, you have spoiled one piece rather than a dozen.
Keeping a large sheet flat
Store the square flat, liners on, in a drawer or a folder rather than rolled in its shipping tube. Filler at this thickness takes a permanent curve from being stored curled, and a piece that wants to arch will lift at the edges no matter how carefully it is placed.
Also in Thermal Pads
GP-Ultimate 15W Thermal Pad, 90 x 50 x 0.5 mm
15 W/mK · 90 × 50 × 0.5 mm
4.7 1,021 ratingscounted across all 5 thicknesses of this sheet size
GP-Ultimate 15W Thermal Pad, 90 x 50 x 0.5 mm (2 pcs)
15 W/mK · 90 × 50 × 0.5 mm · 2 sheets
4.8 734 ratingscounted across all 4 thicknesses of this sheet size
GP-Ultimate 15W Thermal Pad, 120 x 20 x 0.5 mm (2 pcs)
15 W/mK · 120 × 20 × 0.5 mm · 2 sheets
4.6 491 ratingscounted across all 4 thicknesses of this sheet size