GP-Extreme 12W Thermal Pad, 80 x 40 x 0.5 mm
12 W/mK · 80 × 40 × 0.5 mm
4.7 3,062 ratingscounted across all 5 thicknesses of this sheet size
Thermal Pads
GP-Ultimate 15W Thermal Pad, 120 x 120 x 1.0 mm
4.5 297 ratingscounted across all 4 thicknesses of this sheet size
GP-Ultimate 1.0 mm in the 120 x 120 mm bulk format at 15 W/mK, the everyday thickness bought as area.
$28.54
In stock
Sold and shipped by an authorized retail partner. Price shown was current when this page was built.
Check price and buy- Model
- TP-GP04-S-B
- Conductivity
- 15 W/mK
- Sheet size
- 120 × 120 mm
- Thickness
- 1 mm
- In the pack
- 1 sheet
- Series
- GP-Ultimate
- Category
- Thermal Pads
A millimeter is the thickness most benches consume fastest, and this is that thickness in the largest sheet and the highest conductivity offered here. The 120 x 120 mm square of 15 W/mK GP-Ultimate holds enough material for a run of motherboards or a shelf of graphics cards without the packaging and reordering the same area in small sheets would involve.
Stock the size the drawer actually empties
Watch what leaves the bench over a few months and one or two thicknesses will dominate while the outliers sit untouched. Holding the everyday size in bulk and the rare ones as single sheets matches the money to the workload instead of spreading it evenly across sizes nobody reaches for.
Enough area for a whole board at once
Power-delivery heatsinks on two sides of a socket, a chipset plate and a pair of drive shields add up to a surprising amount of surface. From a square this size all of it comes off one piece, cut in one session, with the offcuts still large enough to be the next job.
Plenty of material is not a reason to over-fit
A bulk sheet makes generosity easy, and generosity is the wrong instinct with interface material. Extra thickness holds the assembly apart and lengthens the path the heat has to cross. Cut to the measurement even when there is a whole square left, because the pad that helps is the one that fits.
Tools for a 120 mm run
A rotary cutter against a long steel rule beats a craft knife on a run this length, because one continuous pass leaves a truer edge than several overlapping ones. Whatever the tool, fit a fresh blade first: a dragged edge is the most common defect in material cut on a bench.
Also in Thermal Pads
GP-Ultimate 15W Thermal Pad, 90 x 50 x 0.5 mm
15 W/mK · 90 × 50 × 0.5 mm
4.7 1,021 ratingscounted across all 5 thicknesses of this sheet size
GP-Ultimate 15W Thermal Pad, 90 x 50 x 0.5 mm (2 pcs)
15 W/mK · 90 × 50 × 0.5 mm · 2 sheets
4.8 734 ratingscounted across all 4 thicknesses of this sheet size
GP-Ultimate 15W Thermal Pad, 120 x 20 x 0.5 mm (2 pcs)
15 W/mK · 120 × 20 × 0.5 mm · 2 sheets
4.6 491 ratingscounted across all 4 thicknesses of this sheet size