GP-Extreme 12W Thermal Pad, 80 x 40 x 0.5 mm
12 W/mK · 80 × 40 × 0.5 mm
4.7 3,062 ratingscounted across all 5 thicknesses of this sheet size
Thermal Pads
GP-Ultimate 15W Thermal Pad, 90 x 50 x 1.5 mm (2 pcs)
4.8 734 ratingscounted across all 4 thicknesses of this sheet size
Two 90 x 50 mm sheets of 1.5 mm GP-Ultimate, 15 W/mK each: the most-specified graphics-card repad size, bought in pairs.
$19.99
Low stock at our retail partner
Sold and shipped by an authorized retail partner. Price shown was current when this page was built.
Check price and buy- Model
- 90x50x1.5(2pcs)
- Conductivity
- 15 W/mK
- Sheet size
- 90 × 50 mm
- Thickness
- 1.5 mm
- In the pack
- 2 sheets
- Series
- GP-Ultimate
- Category
- Thermal Pads
This is the pack that suits a card repad better than anything else in the range: the gap size that turns up most often, the compound rated at 15 W/mK, a sheet long enough to run a memory row in one piece, and two of them. It is also the highest-rated item on this site among people who have bought a pad from us.
Everything a card repad usually needs
Memory row, controller island, power-stage strip, backplate contacts. On most cards those four groups all sit in the 1.5 mm band and all fit comfortably within two 90 x 50 mm sheets. Buying the pair is closer to buying a kit for the job than buying a length of material.
Why the pair gets the best reception
Across the thermal pad range this configuration collects the strongest ratings, which fits what the format is: the common thickness, in the better compound, in the quantity a real job consumes. Ratings on variants of a listing are shared across its thicknesses, so treat the figure as a verdict on the product line rather than on one size.
Working through a card methodically
Photograph the cooler before lifting it, note where every existing pad sits and how thick it is, then remove all the old material before cutting anything new. Fitting as you go leads to the last piece being cut from an offcut that was never meant for it.
What to keep after the job
Offcuts larger than a postage stamp are worth keeping, sorted by thickness in labeled bags. Anything narrower than a few millimeters is not: it will curl, collect dust and never lie flat again. Being ruthless with scraps keeps the useful stock findable.
Wrong thickness? Same sheet, other heights
| Thickness | Pack | Price | |
|---|---|---|---|
| 1.5 mm this page | 2 sheets | $19.99 | |
| 0.5 mm | 1 sheet | $10.99 | View |
| 0.5 mm | 2 sheets | $12.89 | View |
| 1 mm | 1 sheet | $13.99 | View |
| 1 mm | 2 sheets | $18.99 | View |
| 1.5 mm | 1 sheet | $12.99 | View |
| 2 mm | 1 sheet | $13.99 | View |
| 2 mm | 2 sheets | $21.99 | View |
| 3 mm | 1 sheet | $15.99 | View |
Also in Thermal Pads
GP-Ultimate 15W Thermal Pad, 90 x 50 x 0.5 mm
15 W/mK · 90 × 50 × 0.5 mm
4.7 1,021 ratingscounted across all 5 thicknesses of this sheet size
GP-Ultimate 15W Thermal Pad, 120 x 20 x 0.5 mm (2 pcs)
15 W/mK · 120 × 20 × 0.5 mm · 2 sheets
4.6 491 ratingscounted across all 4 thicknesses of this sheet size
GP-Ultimate 15W Thermal Pad, 120 x 20 x 0.5 mm
15 W/mK · 120 × 20 × 0.5 mm
4.5 391 ratingscounted across all 4 thicknesses of this sheet size