GP-Extreme 12W Thermal Pad, 80 x 40 x 0.5 mm
12 W/mK · 80 × 40 × 0.5 mm
4.7 3,062 ratingscounted across all 5 thicknesses of this sheet size
Thermal Pads
GP-Extreme 12W Thermal Pad, 120 x 20 x 0.5 mm (2 pcs)
Not yet rated
Two 120 x 20 mm strips of 0.5 mm GP-Extreme at 12 W/mK, enough thin ribbon for several drives or a full memory bank.
$9.85
Low stock at our retail partner
Sold and shipped by an authorized retail partner. Price shown was current when this page was built.
Check price and buy- Model
- TP-VP05-A
- Conductivity
- 12 W/mK
- Sheet size
- 120 × 20 mm
- Thickness
- 0.5 mm
- In the pack
- 2 sheets
- Series
- GP-Extreme
- Category
- Thermal Pads
Thin strips are consumables. An M.2 drive uses one, a memory bank uses another, and a laptop heatpipe run will take a third before the job is done. This pack supplies two 120 x 20 mm strips of 0.5 mm GP-Extreme so that a build with more than one target does not stop halfway. Both are the standard 12 W/mK compound.
Builds with more than one drive
A motherboard with two or three M.2 slots needs a piece for each, and each shield expects its own pad rather than a shared one. Two strips cover a multi-drive build with material left for the next upgrade, which is usually sooner than planned.
Thin material and the case for spares
At 0.5 mm the compound is soft and easy to stretch out of true when peeling the liner. Nobody gets every piece perfect, and a torn strip fitted anyway is a void under a chip. Having a second strip in the pack turns a spoiled cut into a shrug rather than a delay.
Two strips, two thicknesses of confidence
Both pieces here are the same 0.5 mm, but keeping one sealed lets you compare a fresh piece against one that has been in service if you ever need to judge whether an old pad has taken a set. A reference sample costs nothing when it comes in the same envelope.
Where 0.5 mm is genuinely the limit
Below half a millimeter a solid pad stops making sense, because the surfaces would be better served by a paste. This is the thinnest sheet in the GP-Extreme range for that reason, and where the gap is smaller still, a compound is the right tool rather than a thinner ribbon.
Also in Thermal Pads
GP-Ultimate 15W Thermal Pad, 90 x 50 x 0.5 mm
15 W/mK · 90 × 50 × 0.5 mm
4.7 1,021 ratingscounted across all 5 thicknesses of this sheet size
GP-Ultimate 15W Thermal Pad, 90 x 50 x 0.5 mm (2 pcs)
15 W/mK · 90 × 50 × 0.5 mm · 2 sheets
4.8 734 ratingscounted across all 4 thicknesses of this sheet size
GP-Ultimate 15W Thermal Pad, 120 x 20 x 0.5 mm (2 pcs)
15 W/mK · 120 × 20 × 0.5 mm · 2 sheets
4.6 491 ratingscounted across all 4 thicknesses of this sheet size